Different Types of Paintless Dent Repair Techniques
At Bakersfield Mobile Dent Repair, we have come up with many different kinds of techniques over the years. In this article, we do a brief discussion of the different types of techniques that are used. These are purely for informational purposes only and should only be used by a true paintless dent repair professional technician.
Paintless Dent Repair Techniques
When it comes to your vehicle there is always the possibility that it will get damaged with scratches or dents. Badly dented vehicles are an eyesore to the public. Paintless dent repair is a good way of keeping your vehicle in good condition when it gets scratched or dented. Paintless dent repair (PDR) refers to the removal of minor dents from a motor vehicle body if the paint is still intact. This method can repair dents that are several inches wide as long as paint and metal on the surface of the motor vehicle are not scratched. Therefore, paintless dent repair cannot fix vehicles whose paint are cracked or chipped as a result of the dent. Dents come in different sizes and shapes. With paintless dent repair you can seamlessly remove the dents from the body of the vehicle using specific tools and techniques. If your motor vehicle has unsightly dents, paintless dent repair is the easiest way of removing them.
With paintless dent repair, you can either choose to repair the dent on your own or hire a qualified technician. If you are looking to DIY (Do It Yourself), you will need to invest on a good paintless dent repair toolbox. Car dings caused by stray shopping carts are a common dents which you can easily remove with the right toolbox. Also, round dents caused by football or baseball can be removed with paintless dent repair. Paintless dent repair technicians go to the clients garage to repair the dent with only a toolbox. They only massage the dented back until it returns back into shape. However, it is important to note that paintless dent repair cannot be 100% perfect. When paintless dent repair is done well, there would be zero evidence that the dent actually existed.
Below, we have listed and described a few DIY paintless dent repair techniques that you can use to remove dents from your car. Once again these techniques are for informational purposes only and should only be used by a true dent removal specialist. We do not guarantee results from any kind of DIY techniques, nor do we endorse them.
If you must try these DIY techniques, please do so with EXTREME CAUTION.
Use a vacuum cleaner
You can try using a vacuum cleaner suction to get rid of car dent. All you have to use is a dent puller, tape and a vacuum cleaner. A vacuum cleaner suction can pop out the dent from your vehicle.
Use compressed air and hair dryer
You can also use compressed air device to remove car dents. All you have to do is heat the car dent using a hair dryer at a high temperature. When it is hot enough, use an air compressor to spray on the dent. The cold air from the air compressor will make the dent pop out.
Use wooden dowels, hot glue and screw
This is a safe way of removing big dents from your car. You only need to put nails on the side of each dowel and apply a hot glue on the bottom. Place the dowel around the dent and let them dry. Afterwards, pull the wooden dowel to remove the dent.
Use PDR toolbox
If none of the above seems to work, then look for PDR toolbox that can do a good job. Make use of online reviews from sites you want to buy from and get the right tool for the job. Paintless dent repair toolbox is inexpensive, but priceless to remove your car dent.